Reverse Osmosis System

Additional Information

Our system is assembled with 4 components: a pre-filter, the RO membrane, a pressurized 3 gallon tank, and the post-filter. This system uses the compression tank to move the water processed by the RO membrane through the carbon block post filter. The post-filter utilizes the patented solid carbon block technology. You will not find that advantage on other systems. This will insure that you also remove or significantly reduce additional contaminants of health concern.

"More Detail and Diagram"

Following are components with approximate time factor:

Synthetic or Carbon Pre-filter - every 12 months

RO Membrane - every 2 years

Thin film membrane - every 2 years

Solid Carbon - 18 to 24 months

Optional: Capacity Monitored Faucet

Operating Specifications
Specification CTA TF
Minimum water pressure (feed water supply) 50 psi 50 psi
Maximum water pressure (feed wiater supply) 85 psi 85 psi
Minimum feed water temperature 45 degrees F 45 degrees F
Maximum feed water temperature 90 degrees F 110 degrees F
Feed water pH 5.5 - 9.0 3.0 - 11.0
Maximum feed water TDS 1200 ppm 2000 ppm
Chlorine Tolerance Very good OK
with Synthetic Prefilter Sensitive to
chlorine and
other oxidizers.
Use on non-
chlorinated water
or protect with
carbon prefilter.

These are custom made to your order and currently are taking about 3 to 4 weeks to complete. When you order, we will need the following information from a water analysis:
What is the Level of total dissolved solids?

What is the Water Pressure at location of installation?

What is the pH of the water?

Is the water chlorinated?

NOTE: Testing Kits are available for Total Dissolved Solids, pH, and pressure gauge

Reverse Osmosis System Main Page

Business Opportunity Current Price and Questions? HOME PAGE

K. Culbreth, Independent Distributor 257832

[TOP OF PAGE]