MAIN PAGE
[FILTER TYPES]
Multi-Pure® FILTER LIST
750 gal.
600 gal.
1200 gal.
960 gal.
Warnings on the Following:
Plastics and Dangerous Drinking Water in the News
|
Introducing the |
![]() ![]()
Multi-Pure’s Standard Designer Faucet comes in chrome The following faucet options available at an additional cost of $25.00
|
This Multi-Pure® MP750 Plus RO system combines two technologies: Reverse Osmosis AND Solid Carbon Block Filtration to solve difficult water quality problems.
Our Model MP750 Plus RO combines Multi-Pure’s renowned carbon block filter technology with the reverse osmosis technology, making it the most technologically advanced System in the world today.
The Multi-Pure MP750 Plus RO is the only device certified under NSF/ANSI Standards 42, 53, and 58 to reduce: Nitrates/Nitrite, Arsenic V, Chloramine, PCBs, Toxaphene, Chlordane, Lead, Mercury, etc.
Multi-Pure's MP750PlusRO Unit includes pre-filter, RO membrane, and Multi-Pure’s Model MP750SB as a post-filter, giving you the highest quality water possible.
General Product Information
- The unit is easy to install and simple to operate.
- It uses NO electricity and the impurities removed through the RO process are flushed down the drain.
- The processed water is conveniently stored in a 3 gallon pressurized tank which is small enough to fit under your sink along with the system.
Cost of Complete RO system with below the sink solid carbon, storage tank and stainless steel faucet = $629.95
Replacement filters with estimated time usage:
CBC110 Sediment Pre-Filter (Stage 1); change every 6 months = $4.50 CBC112 5 Micron Carbon Block pre-Filter (Stages 2 & 3) change every 6 months = $12.95 CB6 Multi-Pure sub Micron Solid Carbon Block filter (State 5), change every 12 mo or 750 gallons = $49.95 CB-ROM Reverse Osmosis Membrane (Stage 4), change every 2 to 3 years = $99.95 Estimated approximate cost to operate is about $115 to $135 per year.
We use a solid carbon block filter that is considered to be the most effective method for reducing a wide range of contaminants of health concern, which may be present in the water. The carbon is compacted into a dense structure, causing every molecule of water to be forced through microscopic pores of carbon, effectively reducing pollutants. The Solid Carbon Block Filter is a replaceable cartridge designed so that it can be easily changed. There is no electricity required. It does not add salt or silver to the water; and it provides fresh, delicious, healthy drinking water.
EPA Establishment No. 074784-NV-001
The quality of some water supplies may require multiple water treatment methods to reduce the undesirable substances that may be present in your water. Multi-Pure's MP750 Plus RO Unit is designed to compliment Multi-Pure's Solid Carbon Drinking Water Systems with its solid carbon block technology.
The Multi-Pure MP750 Plus RO Unit is easy to install and simple to operate. It uses no electricity and the impurities removed through the reverse osmosis process are flushed down the drain. The pre-filter component provides 5 micron filtration to remove large particulate matter and extend the life of the reverse osmosis membrane. The reverse osmosis component reduces the level of Total Dissolved Solids (TDS), rust, dirt scale, and organic tastes and odors. The processed water is conveniently stored in a 3 gallon pressurized tank which is small enough to fit neatly under your sink.
Multi-Pure's MP750 Plus RO Unit provides water that is sparkling clean and delicious.
Detailed Information on contaminant reduction by the RO system can be found by CLICKING HERE
ORDER FORM Questions? HOME PAGE Multi-Pure Business Opportunity K. Culbreth, Independent Distributor 257832
[TOP OF PAGE]